Chinese translation for "slot configuration"
|
- 割缝形状
Related Translations:
slotting: 插削立刨开槽, 打孔开槽打孔插切缝切削切割条状槽使...出现裂缝掏槽中底打洞钻孔
- Example Sentences:
| 1. | Numbering time slots ; tributary channel numbering ; time slot configuration rule 时隙编号;支路编号;时隙配置规则 | | 2. | Since they have not been put into operation , it is easy to unify the time slot configuration rules 当时都没有开放业务,因此比较容易统一时隙配置规则。 | | 3. | The time slot configuration rules of 155 mbits trunk port signals can remain unchanged since they comply with the requirements in ydn099 - 1998 table 10 其中贝尔公司155mbits中继端口信号时隙配置规则与ydn099 - 1998表10要求一致,不必改动。 | | 4. | Thus a transitional strategy was adopted , that is , time slot configuration was done totally according to ydn099 - 1998 table 10 and the equipment already in operation was chiefly used in the access layer , not connected to lucent s transmission network . now , since numbers can be displayed in lucent s numbering mode on the t2100t2000 nm platform , with only irregular arrangement , no reconfiguration will be done to most of the existing equipment in the near future 即在新建华为传输设备时,时隙配置方式全部按ydn099 - 1998表10方式配置业务(手工) ;已开通设备,主要用于接入层,一般不与朗讯传输网对接,在t2100t2000网管平台上已可以按朗讯式编号方式显示,只是排列不规则,因此对已有的大部分设备近阶段不再重新下发配置。 |
- Similar Words:
- "slot combination" Chinese translation, "slot comer radius" Chinese translation, "slot compatibility" Chinese translation, "slot conditions" Chinese translation, "slot conduit" Chinese translation, "slot connector" Chinese translation, "slot contraction factor" Chinese translation, "slot coordination" Chinese translation, "slot coupled cavity" Chinese translation, "slot coupling" Chinese translation
|
|
|